A paver driveway costs about $10 to $30 per square foot installed, or $5,500 to $26,000 for most homes, with a national average near $13,000, according to LawnStarter, and the final bill for your home depends on the size of the driveway, the paver you choose, and the work needed under the surface. That range is a starting point, not a quote. In Palm Coast, Florida prices also depend on removal of an old driveway, base work for sandy soil, and the city apron in the right-of-way.
Ranges vary by size, so a one-car drive and a three-car drive sit at very different ends of the scale. For the wider hardscape picture, see our hardscaping cost breakdown. The rest of this guide breaks the cost down by size and material, then covers the Florida items that change the bill.
Paver Driveway Cost by Size
Size is the first thing that sets your total. A bigger driveway needs more pavers, more base material, and more labor, so the bill grows with every square foot. The table below shows national ranges from LawnStarter, updated December 27, 2025.
| Driveway size | Typical total cost |
|---|---|
| One-car driveway | $2,000 to $6,000 |
| Two-car driveway | $5,760 to $17,280 |
| Three-car driveway | $8,640 to $25,920 |
To size up your own driveway, measure the length and the width in feet and multiply the two numbers. That gives you the square footage, and multiplying that by a per square foot rate gives you a rough total. Odd shapes, curves, and extra parking pads add square footage fast, so measure the full paved area, not just the main rectangle.
Most Palm Coast homes we work on have two-car driveways, and those sit in the middle of the national range. A small one-car drive can still climb toward the top of its range if old concrete must come out or the base needs deep work.
Cost per Square Foot by Paver Type
The paver you pick sets the per square foot rate. Standard concrete pavers are the most common choice, and they sit at the low end of the range. Premium materials cost more, but they change the look of the whole front of the house.
| Paver type | Cost per square foot installed |
|---|---|
| Concrete pavers | $10 to $20 |
| Clay brick | $10 to $20 |
| Natural stone | $10 to $30 |
| Permeable pavers | $10 to $40 |
| Cobblestone | $20 to $70 |
Concrete pavers are a solid all-round pick for Florida. They come in light colors that stay cooler underfoot, and single pavers can be lifted and reset if a spot settles. Clay brick gives a classic, warm look and holds its color well, but shaded areas can grow algae and need cleaning. Natural stone looks high end and comes in a wide range of colors, yet dark stone can get hot in full sun. Permeable pavers let rain drain through the joints, which helps with runoff on lots that hold water, but the joints need regular upkeep to keep draining. Cobblestone gives an old-world look at the highest price, and its uneven surface is not for everyone.
High-end jobs can reach about $70 per square foot when stone, pattern, and site work all stack up. For most homes, though, the $10 to $30 band covers the realistic choices.
What Raises the Price in Florida
Two driveways of the same size can still carry very different quotes in Flagler County. The ground, the old driveway, and the street connection all add work before a single paver goes down.
Removing old concrete or asphalt is often the first added cost. Hauling and disposal take time and truck space, and a cracked slab can hide soft spots that need extra base work. The base itself is the next big item. Unilock recommends a base of 8 to 12 inches for driveways, and local soil conditions affect the depth needed. Sandy Palm Coast soil drains well, but it also shifts, so a thin base is a false saving.
Edge restraints and borders keep the field pavers from spreading, and a contrasting soldier course border adds both looks and cost. See our landscape curbing cost guide if you want a separate edging feature. Drainage and slope matter just as much. A driveway must shed water away from the house and the garage, and lots that hold water may need a drain line. Read what is a French drain if your yard stays wet after summer storms.
The city apron in the right-of-way is a Palm Coast item many quotes leave out, and we cover it in the permits section below. Access and pattern complexity finish the list. A tight lot, a steep grade, or a herringbone field with a detailed border all take more labor than a plain running bond on open ground.
Palm Coast Driveway Permits and Inspections
New driveways in Palm Coast go through a city driveway permit, permit type DR – DRIVEWAY. Your contractor should pull the permit, and the job is not done until the inspections pass.
A 2026 city record for a paver driveway only in the right-of-way lists inspections for paver restraints, pre-apron (pre-pour), final apron (after pour), utility final, and right-of-way final. The apron is the part of the driveway that sits in the street right-of-way, and the city checks it before and after the pour. Ask any bidder how they handle the apron and the inspections, and get it in writing. You can see the record on the City of Palm Coast permit site.
HOA approval may also apply, so check your community rules before work starts. The swale along the street needs care too. Palm Coast says no major swale modifications should be made without city approval, per the City of Palm Coast Swale FAQs. For how a swale fits into the side of a yard, see our side yard swale guide.
Paver vs Concrete Driveway Cost
Plain concrete is usually cheaper upfront than pavers, so it wins on first cost alone. Pavers win on repair and looks, and that trade is worth weighing before you choose.
| Paver driveway | Concrete driveway | |
|---|---|---|
| Upfront cost | Higher, $10 to $30 per sq ft for most jobs | Lower than pavers |
| Repair | Single pavers can be lifted and reset | Patches show, and a cracked slab may need full replacement |
| Look | Patterns, borders, and many colors | Plain, or stamped and colored at extra cost |
| Cracking | Pavers flex with sandy soil | A slab can crack as soil moves |
| Lifespan | Decades with a sound base and joint sand upkeep | Long life, but cracks and stains show with age |
Pavers flex with sandy soil, which is a real plus in Flagler County, and a settled section can be reset without tearing up the whole drive. Concrete gives a clean, simple surface at a lower price, but a crack runs across the whole slab and is hard to hide. For the full material comparison, see our pavers vs concrete patio post, and keep the comparison to driveways when you price your own job.
How to Save on a Paver Driveway
You can bring the bill down without cutting corners that cost you later. Start with standard concrete pavers and a simple pattern. Fancy stone and complex fields look great, but they add material and labor fast.
Reuse the existing base only if it tests sound. A solid, well-drained base can stay, but a soft or thin base must be rebuilt. Do the borders in pavers and the field in a simpler pattern to get the custom look where the eye lands. Plan the driveway and the walkway together so the crew, the base work, and the delivery cover both jobs at once. Never thin the base to save money. A shallow base on sand is the fastest way to a driveway that dips and shifts.
Get at least two itemized quotes before you choose a contractor. An itemized quote shows removal, base depth, paver type, borders, drainage, and the apron as separate lines, so you can compare like with like. Ask each bidder who pulls the city permit and who pays the inspection fees. A quote that leaves out the apron or the base depth is not cheaper, it is incomplete, and the missing work shows up later as an extra charge.
Keeping a Paver Driveway Looking New
A paver driveway keeps its looks with small, steady care. Sweep it often so sand and dirt do not sit in the joints. Top up joint sand when it washes out after heavy rain.
Clean algae in shady spots before it spreads, and see our paver cleaning guide for the steps. Sealing is optional, and it can deepen color and slow stains, but it is not required for a sound driveway. Fix low spots early, before they grow. If a section has already sunk, read how to fix sunken pavers to see what the repair involves.
After a big storm, check the edges and the joints first. Washout near the borders is the earliest sign that sand has moved, and topping it up early keeps the field tight. Keep roof water and gutter outlets off the driveway surface where you can, since steady runoff cuts channels in the joints over time.
Paver Driveways in Palm Coast
Dreamscapes Florida removes old driveways, builds the base for Florida sand, and handles the city permit and apron inspections. We serve Palm Coast, Flagler Beach, Bunnell, Ormond Beach, and St. Augustine. Call us at (386) 237-2983 or see our hardscape services and request a free estimate for your driveway.
Most paver driveways cost $10 to $30 per square foot installed, or $5,500 to $26,000 in total, with a national average near $13,000, according to LawnStarter. Size, paver type, removal of an old driveway, and base work move the price. Get a local quote for an exact figure.
A two-car paver driveway costs about $5,760 to $17,280 nationally, based on LawnStarter figures. In Florida, the final price varies with removal of old concrete, base depth for sandy soil, borders, and apron work in the right-of-way. Measure your driveway to narrow the range.
Often, yes. Pavers flex with sandy soil, single pavers can be lifted and reset if a section settles, and light colors stay cooler in Florida sun. They cost more upfront than plain concrete, but repairs are simpler and the look holds up well over time.
Yes. A new driveway in Palm Coast goes through a city driveway permit, permit type DR – DRIVEWAY, with right-of-way inspections for paver restraints and the apron. Your contractor should pull the permit, and HOA approval may also apply in your community.
With a proper base, edge restraints, and joint sand upkeep, a paver driveway can last for decades. Settled sections can be reset instead of replaced, which keeps the driveway looking good long term. Care and base depth matter more than any single number.
No. Plain concrete is usually cheaper upfront than pavers. Pavers cost more at install, but they are easier to repair in sections, flex with sandy soil, and often look better longer, which can make them the better long-term value for many Florida homeowners.
